Last updated: 12 Nov 2026 | 17 Views |
Short answer: To build solar panel bases without pouring concrete on site, place precast concrete blocks as ballast. No formwork, no waiting for concrete to cure, and you can move them later. CPS offers 5 sizes, 7–175 kg. Quantity and size follow the solar installer's design; you can send the design to our sales team to review. Blocks with cast-in J-Bolts can be made to your drawing.
| Precast blocks | Concrete poured on site | |
|---|---|---|
| Formwork | Not needed | Needed |
| Wait for curing | No, place right away | Yes |
| Move later | Can be moved | Must be broken out |
| Weight per point | Known in advance from the table | Depends on the pour |
| Size (cm) | Weight (kg) |
|---|---|
| 15 × 15 × 15 | 7 |
| 20 × 20 × 20 | 18 |
| 30 × 30 × 30 | 65 |
| 40 × 40 × 40 | 152 |
| 50 × 50 × 30 | 175 |
The number of blocks and the size depend on the frame design and the number of panels set by the solar installer. You can send the design or site photos to our sales team to review.
The same blocks support office container legs above the ground. Under normal load, use 6 blocks per container.
Yes. Place precast concrete blocks as ballast: no formwork and no waiting for concrete to cure.
15×15×15 cm 7 kg · 20×20×20 cm 18 kg · 30×30×30 cm 65 kg · 40×40×40 cm 152 kg · 50×50×30 cm 175 kg.
As per the solar installer's design. You can send the design to our sales team to review.
Not as standard, but they can be made to order, or made to your drawing.
Yes, small quantities are available, but delivery is charged at actual cost. If you buy only a few and delivery is not worth it, factory pickup is better value.
Yes. The blocks can be lifted and moved, unlike a poured concrete base.
Product: Precast concrete blocks for solar panel bases
+66 61-403-4448, +66 88-088-1510 · LINE @ccp-pavingstone